Where is it mandatory to place warning signs for an electric fence?

Warning signs must be placed at all points where the electric fence may come into contact with public areas, roads, or pedestrian traffic. It is generally recommended to install the signs at intervals of every 50 meters.

At what distance should an electric fence be installed from a public road?

The electric fence must be installed in such a way that people traveling on the road cannot come into contact with it under any circumstances. This typically means maintaining a minimum distance of at least 1 meter from the public road.

At what height should the electric fence wires be installed?

The height of the fence wires depends on the type of animal to be deterred. For smaller animals, the wires should be installed lower, while for larger-bodied animals they must be placed higher, often using multiple strands. In the case of rabbits, it is generally recommended to place the wires more densely near the ground, whereas for deer it is advisable to add an additional strand, potentially using tape, at a height of approximately 1.5 to 2 meters.

Which wire or tape is the best choice for electric fences?

The choice depends on the area to be protected and the type of animals involved. For longer fences, highly conductive wire is recommended, while for temporary installations or for better visibility, tape or cord is preferable. In the case of deer, it is advisable to alternate between cord and tape, placing brightly colored tape on the upper strand. It is important that for larger animals, materials with a tensile strength of at least 300 kg are used.

What can go wrong with an electric fence?

The most common issues include poor grounding, vegetation touching the fence wires, or the use of an energiser with insufficient power. Prolonged improper use can eventually damage the device itself due to short circuits. If the unit contains a fuse and you do not hear the characteristic clicking sound, it is advisable to check the fuse. When operating the fence from a battery, its voltage should always remain above 11.5 V.

What can cause voltage drop in an electric fence system?

Voltage drop can be caused by excessively long fence lines, damaged conductors, poor connections, or wet and insufficient grounding. A certain minimal voltage loss is normal even in properly sized electric fence systems; however, it should not exceed a maximum of 20% of the initial output voltage.

What should I do if animals break through the electric fence?

In such cases, it is advisable to check the voltage level and the placement of the fence wires, and if necessary, use additional conductors or a more powerful energiser. During repairs, it is essential to use proper, professional solutions for wire connections, specifically electric fence connector clamps designed for fence conductors.

Accessories

Subscribe to our newsletter and we will give you valuable content.

Where people use Vadalarm product

See on the map who uses the Vadalarm product or products. Our products are popular all over Europe. Our community is built on quality! Be one of the users who like quality, choose the Vadalarm brand!